52000Pr240002050 - Uscgc Griesser - Annual Dive Tender

• Country: USA
• Summary: 52000Pr240002050 - Uscgc Griesser - Annual Dive Inspection/Zincs
• UST Ref No: 96795801
• Deadline: 15 Feb 2024
• Financier: Self Financed
• Purchaser Ownership: Government
• Tender Value: Refer Document
• Notice Type: Tender
• Document Ref. No.: 52000QR240002050
• Purchaser's Detail:
  Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details.

  Login to see details
• Description:
• Description
  ​​​​​​​Intent. This work item describes the requirements for the Contractor to conduct a hull inspection, cleaning of the vessel-s U/W body and renewal of U/W zinc anodes. Affected surfaces or components include, but are not limited to the following, as per the SOW:
  U/W hull plating. U/W body coating system. Transducer(s)/sonar dome. Drive Systems Appendages Cathodic Protection
  Government-furnished property.
  MTI
  ITEM DESCRIPTION
  NSN/PN
  QTY
  N
  Anode, B/T Gear Case
  P/N: 1081226, NIIN: 015485655
  1
  N
  Anode, B/T Tunnel
  P/N: : CM2000Z
  NIIN: 200126334
  12
  N
  Anode, Sea Chest Grate
  P/N: GA-4, NIIN: 016476179
  4
  N
  Anode, Stern Tube
  P/N: Z0020202H3 REV. 0, NIIN: 016445483
  16
  N
  Nut, Self-Locking,
  P/N: 90715A145, NIIN: 015085774
  32
  N
  Screw, Prop Zinc Plate
  P/N: 950756, NIIN: 016340210
  8
  N
  Screw, Sea Chest Grate Anode
  P/N: 93190A634, NIIN: 016197182
  2
  N
  Screw, Stern Tube Covers
  P/N: 90585A626, NIIN: 016161107
  42
  N
  Zinc Plate, Propeller
  P/N: 950733, NIIN: 016278941
  2
  
  REFERENCESOTHER REFERENCES
  Code of Federal Regulations (CFR) Title 29, Part 1910, Subpart T, 2007, Commercial Diving Operations
  The Contractor must provide the Coast Guard Inspector 24 hours advance notice of when the diver inspection will occur. Before diving procedures are commenced, meet with the COR and the Coast Guard Inspector, to discuss diving safety requirements and the securing of cutter machinery, as applicable.
  NOTE
  At Contractor-s request, Ship-s force will secure and tag out the cathodic protection system, main engines, steering gear, generator set, A/C unit, fire pumps, and all other machinery which may cause a hazard while a diver is in the water.
  
  ​​​​​​​​​​​​​​Pre-diving clearance. The Contractor must ensure that the diving team must obtain clearance from the Officer-of-the-Deck bef...
• Documents:

 Tender Notice

CGC-Winslow-Griesser-FY24-UW-Hull-Diver-Statement-of-Work.docx